Vehicle Rescue Technician (VRT) – Awareness and Operations Pro Board Practice Test

These questions are part of the practice quiz. Start practicing

• If a victim has been partially ejected through a windshield, rescuers need to stabilize the head and:
• What aids rescuers in making accurate decisions before committing equipment and personnel?
• Which of the following is a component of the ABCs of emergency care?
• What special hazard must you be aware of with diesel-electric combination and electric-powered trains?
• When developing a vehicle extrication program, the agency should first consider what?
• When is it best to establish incident command?
• Large scale vehicle accidents that involve multiple agencies should operate under which type of command structure?
• What type of jacks are typically considered least stable under load?
• What is the National Fire Protection Association (NFPA) standard that outlines responsibilities for rescue operations?
• You have arrived at a scene involving a forklift on its side and partially inside a drainage pit. The victim is trapped and entangled, there is evidence of leaking flammable gas. You should:
• During rescues, what is a primary concern regarding a truck's cargo?
• In a vehicle extrication scenario, what is the term for creating a secure entry point without compromising structural integrity?
• After completing scene assessment, rescuers must take which action regarding the vehicle?
• During an extrication, which factor is most critical when assessing the scene?
• What is the primary function of the cold support zone?
• Hand prying tools use ___________ to provide a mechanical advantage.
• The National Fire Protection Association Standard covering rescuer protective clothing while working at an extrication scene is?
• What is the correct description of a stabilized vehicle?
• What is the typical decking material used for the floors in a bus?
• What is an essential skill for personnel involved in vehicle rescue operations for commercial vehicles?
• Which classification of bus design is recognized as transit-style?
• What is the primary advantage of low and medium pressure pneumatic lifting bags over high pressure bags?
• Before shoring operations on a railcar resting on its roof, rescuers should first:
• What type of control measures do gloves and turnout gear represent?
• The primary goal of stabilization is to prevent any further movement of the vehicle by:
• Which type of heavy truck suspension system poses the greatest risk during lifting or stabilization?
• When using pneumatic air bags to perform a lift to free a victim, never stack more than _____________ bags.
• Items such as gloves and eye protection are classified as what?
• A disadvantage of a ratchet jack is:
• What must be maintained during spinal immobilization until the patient is fully secured to a backboard?
• When a patient becomes trapped within an automobile, what is necessary to disentangle them from the wreckage?
• When does the termination phase begin?
• An important safety component that is critical during vehicle stabilization for hybrid vehicles is:
• How long should you push and hold the emergency fuel shutoff device on a railroad locomotive engine?
• What method is commonly used to organize a scene?
• What aspect of scene management should be prioritized during a vehicle rescue?
• What zone is typically established to keep individuals at a safe distance from a hazardous area during a rescue operation?
• Which protective equipment is essential for safety during extrication?
• What type of conventional school bus is classified as Type C?
• In which zone would the command post and logistics area be located during a vehicle extrication incident?
• What is the primary purpose of an incident commander?
• Which type of protective equipment should a firefighter wear if spraying of hydraulic fluid is anticipated?
• Where are the batteries located on Type A buses?
• What is one of the first concerns for ensuring the safety of rescue personnel?
• The initial action by rescue personnel upon arriving at an accident scene should be to?
• Which statement is correct concerning the training and qualifications for responders involved in vehicle and machinery incidents?
• What describes how patients should be managed in regard to their injuries during a mass casualty event?
• The difficulty facing rescuers in the disentanglement of a railcar or bus accident is?
• A Limited Access Zone is characterized by which description?
• What is the primary consideration when performing an extrication from a vehicle on its side?
• A post-incident analysis is essential to which stage?
• Class B fires involve fuels such as:
• What is the priority when stabilizing an accident involving a large truck on top of a smaller car?
• Which of the following vehicle features is designed to reduce costs associated with collisions, but can pose serious risks to emergency workers?
• When planning written response strategies for vehicle incidents, what should be included?
• What is the highest priority during the termination phase?
• Which document serves as a model for standard approaches to managing vehicle incidents?
• Which safety measure is crucial during vehicle rescue operations for heavy trucks?
• After an incident termination, an important document developed is the?
• Which tool poses the greatest threat as an ignition source at a vehicle accident with leaking gasoline?
• Which phase follows patient removal and transport in the vehicle rescue life cycle?
• Which statement about pneumatic lifting bags is correct?
• Which zone typically has the highest risk during a vehicle extrication operation?
• Which tool can easily cut through almost any portion of a bus or heavy vehicle, excluding the frame?
• The process of removing or manipulating vehicle components to allow the safe removal of a patient is called?
• What has the highest priority at a rescue scene?
• Which type of vehicle is most likely to carry hazardous materials?
• What is a function performed in the warm/limited access zone during extrication?
• What is the relationship between the termination phase and accident scene control?
• What should be the focus of personnel in the warm/limited access zone?
• Is it true or false that scene size-up begins with preplanning, training, and selection of appropriate equipment in advance of the emergency?
• Which will be the hardest and most time consuming to forcibly enter for a railcar window?
• In the event of an automobile extrication, which skill is critical for the responding team?
• The most common size cribbing is:
• What should be done to prevent an accident-prone railcar on its roof from moving during rescue operations?
• What is the recommended spacing for cribbing when used with air bags?
• Which tool is commonly used to gain access to a vehicle during an extrication operation?
• What is the role of cribbing in the stabilization of heavy vehicles?
• PTSD in emergency responders refers to what condition?
• When arriving at a scene, what is a critical safety concern for rescuers regarding the vehicle involved?
• What is one potential complication of not properly stabilizing a vehicle in a rescue operation?
• How should all downed wires be treated by rescuers?
• During a vehicle extrication incident, which position is assigned to help manage safety and protect the responders on scene?
• During scene assessment, what should be your first priority?
• How is extrication best defined in the context of vehicle rescue?
• Obtaining access through a jammed Lexan window in a passenger railcar requires a?
• What type of stress do emergency responders experience due to exposure to critical incidents?
• You have arrived at a scene involving a vehicle on its roof with entrapment, and there is evidence of leaking flammables. You should:
• Which hazard is most commonly associated with hybrid and electric vehicles during a rescue?
• What crucial aspect should be maintained if a cervical spine collar is applied?
• True or False: Rescuer face shields, when implemented, should be from 2 or 4 inches in size.
• How should pneumatic lifting bags be utilized on a vehicle?
• In a vehicle accident on the roadway, how should the fire apparatus be positioned?
• When should rescuers begin medical evaluation and treatment for victims during an extrication?
• When you come upon a vehicle that is positioned upright on its wheels, you should:
• During the trauma assessment of a vehicle accident patient, what should the rescuer prioritize?
• What is the first consideration for stabilizing a medium to heavy truck?
• What is the first step outlined in the procedural guide for performing a proper vehicle rescue?
• When approaching a vehicle involved in an accident, what’s the first evaluation step?
• What is the average length of cribbing pieces used in vehicle stabilization?
• What is one of the most critical aspects of assessing the scene of an incident involving a medium or heavy truck?
• When operating on the roadway, what is the primary reason for positioning emergency vehicles?
• Which of the following is essential for assessing the risk of a rescue operation?
• Under the National Incident Management System, who releases information about the incident?
• One method used to achieve an upward pull on a steering column while employing a come-along is:
• During initial size-up of a vehicle incident, which information should be determined in case there is a need for control or mitigation to protect the responders and patients?
• Which is correct regarding forcibly entry through railcar Lexan windows?
• What is the first step in writing an incident response plan?
• When does the emergency phase of a vehicle/machinery incident conclude?
• When stability cannot be maintained after removing the roof for extrication, what is the best option?
• What should be performed first when approaching an accident scene with a hybrid vehicle?
• What form of stress management is crucial for responders involved in traumatic incidents with small children?
• True or False: When working at an extrication scene rescuers should wear goggles or safety glasses as well as a helmet with face shield.
• During extrication, what is the number one priority for all rescue personnel?
• True or False: Gaining access to industrial and agricultural equipment is no different than gaining access to other vehicles.
• Which fuel type is mainly used in most school and transit buses?
• Which of the following statements about pneumatic lifting bags is true?
• When placing a patient on a backboard, the responder at the head must maintain what in relation to the patient's spine?
• What unique challenge is associated with vehicle rescue operations involving trains?
• When responding to motor vehicle accidents, the two main fuels encountered are:
• What is the potential for fires at vehicle accident incidents?
• What term describes the process of removing and treating a patient trapped by machinery or equipment?
• What is the last resort option to gain access to a railcar?
• What should rescuers be cautious of when extricating from a vehicle involved in a collision?
• When assessing an accident scene, what should rescuers be concerned about that may exist?
• A stabilization platform constructed by creating opposing layers of cribbing is called a ___________ crib.
• How many types of school buses are there?
• A principle of management that the Incident Commander should consider as an incident grows is to maintain what?
• What system is used to prioritize patients based on the severity of their injuries?
• The best route to use for extricating victims trapped inside a heavy truck that has come to rest on its side is through the?
• What is the correct method to stabilize an upright cabover truck?
• How should rescuers approach a scene involving downed power lines?
• The location of the emergency exit door on all types of buses is?
• Which should be part of the vehicle assessment?
• What is the best method to enter wrecked railcars?
• When placing an air bag on a box crib, the layer of cribbing in contact with the bag should be:
• What is a significant difference between railroad accidents and most other incidents?
• Where do rescue workers typically perform their functions during a vehicle extrication incident?
• What is the next step in the extrication process after disentanglement?
• During the sizing up of a vehicle accident involving a school, which factor is significant for identifying this incident?
• What is the best option for gaining access to the victims and extricating them when a heavy truck is stabilized on its side?
• What statement about critical incident stress is true?
• What is critical to ensure before beginning any rescue operation?
• When stabilizing a large vehicle, what is a primary aspect to consider?
• In vehicle or machinery incidents, what is the name of the strategy and objectives used during the response?
• In a vehicle rescue scenario, what is the most crucial element to ensure the safety of responders?
• Which assessment is essential before starting a vehicle extrication operation?
• When stabilizing an overturned vehicle, what is the primary concern for rescuers?
• Which statements are true regarding the Incident Action Plan (IAP)?
• Where should wood be placed during operations with pneumatic lifting bags?
• Any vehicle, equipment, or other objects involved in a rescue incident must be ______________ to prevent them from shifting or inflicting more damage or injuries.
• Which role ensures that safety procedures are followed during a vehicle extrication?
• What is the maximum weight of a truck/semi-tractor trailer in pounds?
• Which section of the Incident Command System is responsible for carrying out actual rescue tactics?
• Which component is NOT recommended for use in stabilizing hybrid vehicles?
• What does the Support Zone (cold) primarily refer to?
• What is the spacing of heavy-duty framing members in Amtrak cars?
• At an emergency incident, you fall under which major area of the National Incident Management System?
• Which of the following is not a goal of the termination phase?
• When assessing the scene of a vehicle accident, where should you park your vehicle?
• The key element for ensuring the safety of the rescue company and other units at the emergency scene is:
• The process of stabilizing two vehicles that must come to rest on top of each other is:
• Which term refers specifically to the part of vehicle extrication related to the removal of vehicle components to safely extract a victim?
• The major structural unit of a vehicle is its:
• What is included in the initial scene assessment for vehicle extrication?
• What equipment is commonly used to stabilize a vehicle during an extrication operation?
• What is a primary benefit of conducting pre-incident training for vehicle rescue operations?
• What is the final phase of vehicle extrication duties?
• Which aspect is critical when sizing up a vehicle accident involving school buses?
• Regarding hand protection during extrication, which statement is accurate?
• Who should coordinate rescue efforts to ensure organized and effective patient rescue?
• What is the primary resource for helping first responders identify hazardous materials and their associated placards?
• Which type of fuel is not considered a flammable liquid?
• Which statement is correct regarding stabilization techniques?
• True or False: Rescuers should wear firefighter gloves during extrication operations to provide the highest protection from blood.
• The key concern when a truck comes to rest on its roof is:
• Which statement is true regarding farm or industrial vehicles involved in an accident?
• What are markings on vehicles and buildings that alert emergency responders of the presence of hazardous materials?
• Which of the following is considered an emergency function?
• Electric locomotive trains can travel at speeds up to what mph?
• What must responders do after an incident involving serious trauma to civilians?
• Which guidelines govern traffic flow around an extrication incident?
• Why is preplanning essential for vehicle rescue operations?
• What characterizes a Hot/Restricted Zone?
• Which is a recommended safety rule when operating pneumatic lifting bags?
• What is the primary objective when assessing a casualty in a vehicle accident?
• Which organization is responsible for producing summary reports on fatal highway accidents?
• What is the correct order of approach steps typically performed during a vehicle rescue?
• When stabilizing a vehicle, which among the following should always be taken into account?
• When using cribbing for support, the cribbing should be placed:
• Which is a primary goal of the termination stage?
• What is the greatest risk to a patient during an emergency move?
• Which position is the most stable for a vehicle resting on a flat surface?
• The average width of the passenger door on a type C and D school bus is ____________ inches.
• If a vehicle is in contact with a downed wire, what is a safe plan of action?
• What should fire protection at vehicle accidents include at a minimum?
• Which of the following is a major area addressed in the National Incident Management System?
• What method is employed to prevent unwanted movement of a vehicle?
• Which feature of Type D buses distinguishes them from Type A and C?
• What is one effective method for stabilizing a heavy truck that has overturned?
• What is the main focus during the assessment phase of a vehicle collision?
• Which document should be available on a fire vehicle to assist in identifying placards?
• What differentiates school and transit buses from other vehicles during extrication?
• How can a tractor/trailer on its side be stabilized effectively?
• What is an essential first step when arriving at a vehicle rescue scene with potential hazards?
• The key to an efficient extrication is proper ____________ of the situation.
• Which is a basic tool essential for stabilizing a vehicle?
• In a rescue operation, which vehicle component can be manipulated to aid in patient extrication?